The installation of after-market woofers in factory placements limited by a reduced depth is a recurring problem that forces specialists to make complicated mechanical changes, extending the time to finish the job significantly. The Cento line new C 165 F flat profile woofer is the solution, thanks to a super slim basket with reduced depth that allows the use even in the most problematic OEM scenarios, widespread in new generation cars. The R&D team, through an extensive design process was able to obtain high performance even with the super slim basket feature. This was made possible by the optimization of the mobile group excursion and the new design of the cone and dust-cup geometry. Like the other components of the Cento range, the use of SPP-M (Semi-Pressed Paper-Mica) provides the C 165 F with a light and rigid cone at the same time that guarantees high efficiency and an extended frequency response.
Sehr stabiler ABS Kunstoff mit einem abnehmbaren Metall Gitter
Power Handling - Peak W | 270 |
Power Handling - Continuous W | 90 |
Impedance Ω | 4 |
Frequency response Hz | 65 ÷ 22,5k |
Sensitivity dB SPL | 93 |
Voice coil Ø mm (in.) | Woofer 25 (1) |
Woofer size mm (in.) | 165 (6.5) |
Tweeter size mm (in.) | 26 (1) |
Woofer magnet | High density flux ferrite |
Tweeter magnet | Neodymium |
Woofer cone | Semi Pressed Paper-Mica |
Tweeter dome | Tetolon® |
Crossover type | 2 Way Passive Crossover |
Crossover cut off | 2,5 kHz @ 12 dB Oct. |
1. 26mm (1 in.) Soft Tetolon® Membrane und 20mm (0.8 in.) Schwingspule für eine natürliche und sehr detailreiche Musikwiedergabe bis in die kleinsten Nuancen.
2. Extrem starker Neodymium Magnet, optimiert für ein Maximum an Kontrolle bei hoher Belastung im Hochmitteltonbereich.
3. Faceplate Geometrie optimiert mit FEM (Finite Element Modeling) Technik für eine lineare Frequenz Resonanz im Off-Axis Installationen.
4. Breite Palette an Zubehör für eine einfache Installation in originalen Einbauplätzen.
C 165 F:
1. Flaches Einbauprofil für einfaches austauschen von OEM Lautsprechern.
2. Semi-Pressed Papier Memrane verstärkt mit Mica Puder für überlegene Steifigkeit und eine flache Resonanz.
3. Extrem starker Neodynium Magnet kombiniert mit Low-Carbon Polplatten die Verzerrungen bei hoher Lautstärke reduzieren.
4. Pure Kupfer Schwingspule, gewickelt auf einem Aluminum Träger für sehr gute thermische und mechanische Belastbarkeit.
5. Stylisches Lautsprechergitter aus Metall eingefasst in einen stabilen Kunststoffrahmen.
CCX 2:
1. Hochton Level einstellbar in zwei Positionen (0, +3 dB) für eine perfekte Anpassung an den Geschmack der Hörers.
2. Kondensatoren mit minimalen Verlusten und Spulen aus purem Kupfer für ein Maximum an Transparenz und Klarheit in hohen Frequenzlagen.
3. Kompaktes Design im Metallic Look für eine einfache Installation, mit Belüftungsschlitzen für eine effiziente Abfuhr der Wärme.